Latest News2021-12-03T12:10:47+01:00

Latest News

2902, 2024

Start of HFM Working Group

February 29th, 2024|

Munich, February 2024 – The Standardization Group for Embedded Technologies e.V. (SGET) announces the start of a new working group for the development of Harmonized FPGA Module™ (HFM) standard. The founding meeting took place on February 27 and hosted 18 participating organizations from all over the world. The Harmonized FPGA Module™ (HFM) Standard Development Team aims at developing a groundbreaking standard tailored for the FPGA and SoC-FPGA System-on-Module. The [...]

1112, 2023

Call for Participation: Harmonized FPGA Modules (HFM)

December 11th, 2023|

Munich, December 2023 – As of today, the Standardization Group for Embedded Technologies e.V. (SGET) starts its Call for Participation in order to found a new Standard Development Team (SDT) for a Harmonized FPGA Module (HFM) standard. The call will remain open until 12. January 2024 for all who whould like to participate in developing an open standard for the standardization of FPGA modules. In order to learn more [...]

2707, 2023

Standardizing FPGA: Findings and next steps

July 27th, 2023|

Munich, July 2023 – Looking back at this year's FPGA Conference Europe, we have gained a lot of insights on standardizing FPGA. There is a broad consensus in the FPGA market, that there is a need for something to standardize FPGA to some extent. Not only for hardware, but also for configuration and software. Which is exactly what we as SGET have been working on for the last 18 [...]

1805, 2022

Open Standard Module with initial Design Guide release

May 18th, 2022|

Munich, May 2022 – SGET announces two important innovations for its solder-on module standard, which was launched in 2019: On the one hand, the new specification in version 1.1 with many backward-compatible improvements and future-proof extensions. And on the other hand, the first design guide with practical tips and information on the design-in of OSM modules. With the Open Standard Module (OSM) standard published in 2021, the Standardization Group [...]

2906, 2021

SGET releases new Design Guide 2.1.1 for SMARC carrier boards: Extended connectivity for Arm and x86

June 29th, 2021|

Munich, Germany, 1 June 2021: SGET e.V. – a technical consortium hosting and developing specifications for embedded computer technology – has released the new design guide for its latest SMARC 2.1.1 specification. It offers embedded systems developers comprehensive design guidance for SMARC based carrier boards and now covers all features and interfaces that were implemented with the recent SMARC specification update. The new specification gives designers freedom with regards [...]

1606, 2021

SGET announces new chairman and sets sail for a new decade

June 16th, 2021|

Munich, June 2021 – SGET, an international not-for-profit association of companies and organizations that collaboratively develop independent specifications for embedded computer technology, held its triennial management board election. The group elected a new chairman and re-elected four members of the board to lead the association through 2024. At the annual general meeting of the Standardization Group for Embedded Technologies e.V. (SGET), held on June 08, the new management board was [...]

1805, 2021

SGET team SDT.01 finalized new Design Guide 2.1.1 for the SMARC modules

May 18th, 2021|

Munich, Germany, 5 May 2021: SGeT, the Standards Group for Embedded Technologies e.V., updated the design Guide for its famous SMARC modules to offer carrier board design guidance for the new features and interfaces of the recently released specification update. As one of the major changes in the new specification was the allowance for SERDES signaling over the last two PCIe lanes, it shows now for easy understanding a GBE [...]

912, 2020

New milestone in miniaturization: From credit card to postage stamp

December 9th, 2020|

Munich, Germany, 8. December 2020: SGET e.V. – a technical consortium hosting and developing specifications for embedded computer technology – announces release 1.0 of the new OSM™ Computer-on-Module standard. OSM™, which is short for Open Standard Module™, defines one of the first standards for directly solderable and scalable embedded computer modules. It also marks a new milestone in the miniaturization of modular COM/carrier designs, replacing credit card-sized modules with postage stamp-sized [...]

210, 2020

New President for SGET e.V.

October 2nd, 2020|

Munich, Germany, 28 September, 2020: The SGET e.V., a technical consortium hosting and developing specifications for embedded computer technology, announces a change in the management of the organization. Wolfgang Eisenbarth, founding member of SGET and president since 2017, retires from his position for personal reasons. During his time in office, the SGET has grown to 47 member companies and 5 active working groups. The complete SGET management would like to [...]

2005, 2020

SMARC module 2.1.1 specification released today

May 20th, 2020|

The SDT.01 released today the SMARC module specification in Version 2.1.1. It is a minor release that fixes one issue that was recently found in SMARC 2.1 specification. You can download SMARC module 2.1.1 specification directly from our SMARC module site.

Go to Top